SUDARSHAN ELASTOMER’S coil tubing strippers have been the benchmark pack-off system for the coiled tubing industry. Through many years of field-proven service, its reliability and low-maintenance design have established it as the most cost effective pack-off available.
SEPL coil tubing strippers is designed to pack-off on coiled tubing as it is stripped in and out of the hole at well pressures up to 8,000 psi. This conventional unit uses the standard 4 inch diameter “Interlock” packer elements which can be easily changed by removing the top entry split cap and using hydraulic pack-off pressure to expose the packer for quick replacement. These are available in dual compound top loads.

Available Sizes As Below.
OD 3″ with ID option 1″, 1 1/4″, 1 1/2″ and 1 3/4″
OD 4″ with ID option 1″, 1 1/4″, 1 1/2″, 1 3/4″ 2″

FEATURES & BENEFITS
1.Unique additive mixed with urethane to lessen friction wear.
2.Improved chemical degradation resistance.
3.Finest urethane compounds with higher tensile and abrasion resistance
4.Operating temperature range 20°F to 230º F
5.Operating range 1000 – 8000+ psi
6.OBM or synthetic based muds resistant.
7.Completely compatible with all existing stripping heads.
8.Available in any size bore strippers and dual compound top loads.