Desander Assembly & Spares   Desilter Assembly & Spares   Mud Pump Spares   Plunger Pump Spares   Other Accessories & Spares Other Accessories & Spares Conventional Cementing Plugs SEPL’s Cementing Plugs are made out of specially engineered rubber compound, live, resilient, unaffected by water, oil and mud chemicals, with tremendous resistance to cutting, tearing and abrasion and bonded with highest grade of aluminium alloy for light weight. They are available for all types and sizes of casing size from 5" to 20" both top and bottom.         Drill Pipe Wipers SEPL’s Drill Pipe Split Dual Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Designed for application to Drill Pipe where a solid master bushing is used. Dual wipers are made with a split spring steel reinforcing ring. Construction of dual wipers are such, so as to allow the wiper to be opened up and threaded around the pipe. They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings.         Kelly Wipers SEPL’s Kelly Wipers are made out of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Kelly Wipers are available for different sizes of hexagonal kellys.         Drill Pipe Protectors SEPL’s Drill Pipe Spiral Fluted Protectors are manufactured by using high quality elastomer, bonded with specially designed spring steel cage. Spring steel cage provides gripping power to the protectors while retaining its shape also. Different grades of elastomer are being used to make protectors resistance to high bottom hole temperatures, chemicals attacks from oil based drilling fluids and minimum oil absorption characteristics. They are designed for full surface contact on the drill pipes not allowing any oil fluid to enter behind the protector, causing it is not to slide and come lose on the pipe even in deviated holes. They are available for different sizes of drill pipes with stainless steel locking pings.         Tongue Pull Backs SEPL’s Tongue Pull Back are manufactured by using highly elastic strong rubber compound with very good spring action. The spring action of the SEPL Tong Pull Back strap automatically repositions the Tong after each take-up, thereby saving lots of time.         Elevator Balancing Straps SEPL’s Elevator Balancing Straps are made of the finest quality moulded rubber for long service life. One end of the rubber strap is equipped with an end attachment, for the handle of the elevator and the other end consist of U-Bolt Clamp for attachment to the elevator link.         Clamp on Casing Protectors SEPL’s Clamp on Casing Protectors are available both in polyurethane and highest grade of tough special polymers. They are built on special steel cage for the superior grip and specially designed stainless steel handles ensures quick gripping and removing from the casing threads. Available from 5" casings to 20" casing sizes.         Drill Pipe / Pin & Box Protectors (Polymeric) SEPL’s special achievement is for developing a very tough polymer for the manufacture of Polymeric Drill Pipe / Pin Box Protectors. They are light in weight in comparison to conventional metallic protectors and because of polymeric character they don't get stuck up with thread after long storage as happened with metallic protectors because of rusting. They are available in various sizes of Drill Pipe / Pin & Boxes.         Non-Rotating Stabilizer Sleeves SEPL’s Stabilizers Sleeves are manufactured by using blend of Hydrogenated Nitrile Rubber, most suitable for such application, strongly bonded with metal wherever required.         Packer Redresser Kits SEPL’s Redresser Kits are manufactured by using the most toughest elastomer known for such applications, i.e. Hydrogenated Nitrile Rubber highly suitable for downhole applications. They are even resistance to H2S Gas. Available in different sizes for different models of Hydraulic and Pneumatic Packers of reputed manufacturers         Dresser Couplings & Packings SEPL’s Dresser Couplings & Packings are available in sizes 4", 6", 8", 10" and 12". Couplings are made out of malleable cast steel with superior quality polymeric inserts / packings.         Victaulic Couplings & Packings SEPL’s victaulic Couplings are manufactured by using high grade malleable cast iron. They are available in both Clamp type design and also in two bolt type design, with Gaskets made out of high quality rubber for proper gripping and sealing. All standard sizes from 1" to 8" are available. Clamp type coupling are available in sizes 2" and 4" and rest in Two Bolt type Clamping.         Swivel Wash Pipe & Packings Swivel Wash Pipe & Packings are available for almost all makes of Swivels, presently being used by oil industries. Wash Pipes are manufactured by using forged-alloy steel / stainless steel, hard-coated for long life. Wash Pipe Packings are manufactured by using special technique for fabric building to ensure high-pressure sealing and very very long life.         Hammer Unions & Packings SEPL’s Hammer Unions, made from forged carbon steel are available in a choice of end connections with standard API line pipe threads and three wing lug forging. With highest quality of threads and seats, we give warranty against defects in material and workmanship, and interchangeability with similar components made by other manufacturers.         'F' Type Cup Testers SEPL’s 'F' Type Cup Testers, Assemblies are available in sizes 5.1/2", 7", 9.5/8", 13.3/8". Cups are manufactured by using very tough specially designed synthetic matter strongly bonded with metal cores to sustain very high testing pressure and to restrain its original shape and size after prolonged test pressure is released.       top Home | About Us | Products | Enquiry | Contact Us © copyright 2009, Sudarshan Elastomer Pvt Ltd.